Fields

• backendFlush :: IO ()

  Flush the connection sending buffer, if any.

• backendClose :: IO ()

  Close the connection.

• backendSend :: ByteString -> IO ()

  Send a bytestring through the connection.

• backendRecv :: Int -> IO ByteString

  Receive specified number of bytes from the connection.

Fields

• clientUseMaxFragmentLength :: Maybe MaxFragmentEnum

  Default: Nothing

• clientServerIdentification :: (HostName, ByteString)

  Define the name of the server, along with an extra service identification blob. this is important that the hostname part is properly filled for security reason, as it allow to properly associate the remote side with the given certificate during a handshake.

  The extra blob is useful to differentiate services running on the same host, but that might have different certificates given. It's only used as part of the X509 validation infrastructure.

  This value is typically set by defaultParamsClient.

• clientUseServerNameIndication :: Bool

  Allow the use of the Server Name Indication TLS extension during handshake, which allow the client to specify which host name, it's trying to access. This is useful to distinguish CNAME aliasing (e.g. web virtual host).

  Default: True

• clientWantSessionResume :: Maybe (SessionID, SessionData)

  try to establish a connection using this session.

  Default: Nothing

• clientShared :: Shared

  See the default value of Shared.

• clientHooks :: ClientHooks

  See the default value of ClientHooks.

• clientSupported :: Supported

  In this element, you'll need to override the default empty value of of supportedCiphers with a suitable cipherlist.

  See the default value of Supported.

• clientDebug :: DebugParams

  See the default value of DebugParams.

• clientEarlyData :: Maybe ByteString

  Client tries to send this early data in TLS 1.3 if possible. If not accepted by the server, it is application's responsibility to re-sent it.

  Default: Nothing

Fields

• serverWantClientCert :: Bool

  Request a certificate from client.

  Default: False

• serverCACertificates :: [SignedCertificate]

  This is a list of certificates from which the disinguished names are sent in certificate request messages. For TLS1.0, it should not be empty.

  Default: '[]'

• serverDHEParams :: Maybe DHParams

  Server Optional Diffie Hellman parameters. Setting parameters is necessary for FFDHE key exchange when clients are not compatible with RFC 7919.

  Value can be one of the standardized groups from module Network.TLS.Extra.FFDHE or custom parameters generated with generateParams.

  Default: Nothing

• serverHooks :: ServerHooks

  See the default value of ServerHooks.

• serverShared :: Shared

  See the default value of Shared.

• serverSupported :: Supported

  See the default value of Supported.

• serverDebug :: DebugParams

  See the default value of DebugParams.

• serverEarlyDataSize :: Int

  Server accepts this size of early data in TLS 1.3. 0 (or lower) means that the server does not accept early data.

  Default: 0

• serverTicketLifetime :: Int

  Lifetime in seconds for session tickets generated by the server. Acceptable value range is 0 to 604800 (7 days). The default lifetime is 86400 seconds (1 day).

  Default: 86400 (one day)

Fields

• sharedCredentials :: Credentials

  The list of certificates and private keys that a server will use as part of authentication to clients. Actual credentials that are used are selected dynamically from this list based on client capabilities. Additional credentials returned by onServerNameIndication are also considered.

  When credential list is left empty (the default value), no key exchange can take place.

  Default: mempty

• sharedSessionManager :: SessionManager

  Callbacks used by clients and servers in order to resume TLS sessions. The default implementation never resumes sessions. Package tls-session-manager provides an in-memory implementation.

  Default: noSessionManager

• sharedCAStore :: CertificateStore

  A collection of trust anchors to be used by a client as part of validation of server certificates. This is set as first argument to function onServerCertificate. Package crypton-x509-system gives access to a default certificate store configured in the system.

  Default: mempty

• sharedValidationCache :: ValidationCache

  Callbacks that may be used by a client to cache certificate validation results (positive or negative) and avoid expensive signature check. The default implementation does not have any caching.

  See the default value of ValidationCache.

• sharedHelloExtensions :: [ExtensionRaw]

  Additional extensions to be sent during the Hello sequence.

  For a client this is always included in message ClientHello. For a server, this is sent in messages ServerHello or EncryptedExtensions based on the TLS version.

  Default: []

Fields

• onCertificateRequest :: OnCertificateRequest

  This action is called when the a certificate request is received from the server. The callback argument is the information from the request. The server, at its discretion, may be willing to continue the handshake without a client certificate. Therefore, the callback is free to return Nothing to indicate that no client certificate should be sent, despite the server's request. In some cases it may be appropriate to get user consent before sending the certificate; the content of the user's certificate may be sensitive and intended only for specific servers.

  The action should select a certificate chain of one of the given certificate types and one of the certificates in the chain should (if possible) be signed by one of the given distinguished names. Some servers, that don't have a narrow set of preferred issuer CAs, will send an empty DistinguishedName list, rather than send all the names from their trusted CA bundle. If the client does not have a certificate chaining to a matching CA, it may choose a default certificate instead.

  Each certificate except the last should be signed by the following one. The returned private key must be for the first certificates in the chain. This key will be used to signing the certificate verify message.

  The public key in the first certificate, and the matching returned private key must be compatible with one of the list of HashAndSignatureAlgorithm value when provided. TLS 1.3 changes the meaning of the list elements, adding explicit code points for each supported pair of hash and signature (public key) algorithms, rather than combining separate codes for the hash and key. For details see RFC 8446 section 4.2.3. When no compatible certificate chain is available, return Nothing if it is OK to continue without a client certificate. Returning a non-matching certificate should result in a handshake failure.

  While the TLS version is not provided to the callback, the content of the signature_algorithms list provides a strong hint, since TLS 1.3 servers will generally list RSA pairs with a hash component of Intrinsic (0x08).

  Note that is is the responsibility of this action to select a certificate matching one of the requested certificate types (public key algorithms). Returning a non-matching one will lead to handshake failure later.

  Default: returns Nothing anyway.

• onServerCertificate :: OnServerCertificate

  Used by the client to validate the server certificate. The default implementation calls validateDefault which validates according to the default hooks and checks provided by Data.X509.Validation. This can be replaced with a custom validation function using different settings.

  The function is not expected to verify the key-usage extension of the end-entity certificate, as this depends on the dynamically-selected cipher and this part should not be cached. Key-usage verification is performed by the library internally.

  Default: validateDefault

• onSuggestALPN :: IO (Maybe [ByteString])

  This action is called when the client sends ClientHello to determine ALPN values such as '["h2", "http/1.1"]'.

  Default: returns Nothing

• onCustomFFDHEGroup :: DHParams -> DHPublic -> IO GroupUsage

  This action is called to validate DHE parameters when the server selected a finite-field group not part of the "Supported Groups Registry" or not part of supportedGroups list.

  With TLS 1.3 custom groups have been removed from the protocol, so this callback is only used when the version negotiated is 1.2 or below.

  The default behavior with (dh_p, dh_g, dh_size) and pub as follows:

  1. rejecting if dh_p is even
  2. rejecting unless 1 < dh_g && dh_g < dh_p - 1
  3. rejecting unless 1 < dh_p && pub < dh_p - 1
  4. rejecting if dh_size < 1024 (to prevent Logjam attack)

  See RFC 7919 section 3.1 for recommandations.

Fields

• onClientCertificate :: CertificateChain -> IO CertificateUsage

  This action is called when a client certificate chain is received from the client. When it returns a CertificateUsageReject value, the handshake is aborted.

  The function is not expected to verify the key-usage extension of the certificate. This verification is performed by the library internally.

  Default: returns the followings:

  CertificateUsageReject (CertificateRejectOther "no client certificates expected")
  

• onUnverifiedClientCert :: IO Bool

  This action is called when the client certificate cannot be verified. Return True to accept the certificate anyway, or False to fail verification.

  Default: returns False

• onCipherChoosing :: Version -> [Cipher] -> Cipher

  Allow the server to choose the cipher relative to the the client version and the client list of ciphers.

  This could be useful with old clients and as a workaround to the BEAST (where RC4 is sometimes prefered with TLS < 1.1)

  The client cipher list cannot be empty.

  Default: taking the head of ciphers.

• onServerNameIndication :: Maybe HostName -> IO Credentials

  Allow the server to indicate additional credentials to be used depending on the host name indicated by the client.

  This is most useful for transparent proxies where credentials must be generated on the fly according to the host the client is trying to connect to.

  Returned credentials may be ignored if a client does not support the signature algorithms used in the certificate chain.

  Default: returns mempty

• onNewHandshake :: Measurement -> IO Bool

  At each new handshake, we call this hook to see if we allow handshake to happens.

  Default: returns True

• onALPNClientSuggest :: Maybe ([ByteString] -> IO ByteString)

  Allow the server to choose an application layer protocol suggested from the client through the ALPN (Application Layer Protocol Negotiation) extensions. If the server supports no protocols that the client advertises an empty ByteString should be returned.

  Default: Nothing

• onEncryptedExtensionsCreating :: [ExtensionRaw] -> IO [ExtensionRaw]

  Allow to modify extensions to be sent in EncryptedExtensions of TLS 1.3.

  Default: 'return . id'

Fields

• nbHandshakes :: !Word32

  number of handshakes on this context

• bytesReceived :: !Word32

  bytes received since last handshake

• bytesSent :: !Word32

  bytes sent since last handshake

Fields

• supportedVersions :: [Version]

  Supported versions by this context. On the client side, the highest version will be used to establish the connection. On the server side, the highest version that is less or equal than the client version will be chosen.

  Versions should be listed in preference order, i.e. higher versions first.

  Default: [TLS13,TLS12,TLS11,TLS10]

• supportedCiphers :: [Cipher]

  Supported cipher methods. The default is empty, specify a suitable cipher list. ciphersuite_default is often a good choice.

  Default: []

• supportedCompressions :: [Compression]

  Supported compressions methods. By default only the "null" compression is supported, which means no compression will be performed. Allowing other compression method is not advised as it causes a connection failure when TLS 1.3 is negotiated.

  Default: [nullCompression]

• supportedHashSignatures :: [HashAndSignatureAlgorithm]

  All supported hash/signature algorithms pair for client certificate verification and server signature in (EC)DHE, ordered by decreasing priority.

  This list is sent to the peer as part of the "signature_algorithms" extension. It is used to restrict accepted signatures received from the peer at TLS level (not in X.509 certificates), but only when the TLS version is 1.2 or above. In order to disable SHA-1 one must then also disable earlier protocol versions in supportedVersions.

  The list also impacts the selection of possible algorithms when generating signatures.

  Note: with TLS 1.3 some algorithms have been deprecated and will not be used even when listed in the parameter: MD5, SHA-1, SHA-224, RSA PKCS#1, DSS.

  Default:

    [ (HashIntrinsic,     SignatureEd448)
    , (HashIntrinsic,     SignatureEd25519)
    , (Struct.HashSHA256, SignatureECDSA)
    , (Struct.HashSHA384, SignatureECDSA)
    , (Struct.HashSHA512, SignatureECDSA)
    , (HashIntrinsic,     SignatureRSApssRSAeSHA512)
    , (HashIntrinsic,     SignatureRSApssRSAeSHA384)
    , (HashIntrinsic,     SignatureRSApssRSAeSHA256)
    , (Struct.HashSHA512, SignatureRSA)
    , (Struct.HashSHA384, SignatureRSA)
    , (Struct.HashSHA256, SignatureRSA)
    , (Struct.HashSHA1,   SignatureRSA)
    , (Struct.HashSHA1,   SignatureDSS)
    ]
  

• supportedSecureRenegotiation :: Bool

  Secure renegotiation defined in RFC5746. If True, clients send the renegotiation_info extension. If True, servers handle the extension or the renegotiation SCSV then send the renegotiation_info extension.

  Default: True

• supportedClientInitiatedRenegotiation :: Bool

  If True, renegotiation is allowed from the client side. This is vulnerable to DOS attacks. If False, renegotiation is allowed only from the server side via HelloRequest.

  Default: False

• supportedExtendedMasterSec :: EMSMode

  The mode regarding extended master secret. Enabling this extension provides better security for TLS versions 1.0 to 1.2. TLS 1.3 provides the security properties natively and does not need the extension.

  By default the extension is enabled but not required. If mode is set to RequireEMS, the handshake will fail when the peer does not support the extension. It is also advised to disable SSLv3 which does not have this mechanism.

  Default: AllowEMS

• supportedSession :: Bool

  Set if we support session.

  Default: True

• supportedFallbackScsv :: Bool

  Support for fallback SCSV defined in RFC7507. If True, servers reject handshakes which suggest a lower protocol than the highest protocol supported.

  Default: True

• supportedEmptyPacket :: Bool

  In ver <= TLS1.0, block ciphers using CBC are using CBC residue as IV, which can be guessed by an attacker. Hence, an empty packet is normally sent before a normal data packet, to prevent guessability. Some Microsoft TLS-based protocol implementations, however, consider these empty packets as a protocol violation and disconnect. If this parameter is False, empty packets will never be added, which is less secure, but might help in rare cases.

  Default: True

• supportedGroups :: [Group]

  A list of supported elliptic curves and finite-field groups in the preferred order.

  The list is sent to the server as part of the "supported_groups" extension. It is used in both clients and servers to restrict accepted groups in DH key exchange. Up until TLS v1.2, it is also used by a client to restrict accepted elliptic curves in ECDSA signatures.

  The default value includes all groups with security strength of 128 bits or more.

  Default: [X25519,X448,P256,FFDHE3072,FFDHE4096,P384,FFDHE6144,FFDHE8192,P521]

Fields

• debugSeed :: Maybe Seed

  Disable the true randomness in favor of deterministic seed that will produce a deterministic random from. This is useful for tests and debugging purpose. Do not use in production

  Default: Nothing

• debugPrintSeed :: Seed -> IO ()

  Add a way to print the seed that was randomly generated. re-using the same seed will reproduce the same randomness with debugSeed

  Default: no printing

• debugVersionForced :: Maybe Version

  Force to choose this version in the server side.

  Default: Nothing

• debugKeyLogger :: String -> IO ()

  Printing master keys.

  Default: no printing

Fields

• sessionResume :: SessionID -> IO (Maybe SessionData)

  used on server side to decide whether to resume a client session.

• sessionResumeOnlyOnce :: SessionID -> IO (Maybe SessionData)

  used on server side to decide whether to resume a client session for TLS 1.3 0RTT. For a given SessionID, the implementation must return its SessionData only once and must not return the same SessionData after the call.

• sessionEstablish :: SessionID -> SessionData -> IO ()

  used when a session is established.

• sessionInvalidate :: SessionID -> IO ()

  used when a session is invalidated.

Fields

• sessionVersion :: Version
   
• sessionCipher :: CipherID
   
• sessionCompression :: CompressionID
   
• sessionClientSNI :: Maybe HostName
   
• sessionSecret :: ByteString
   
• sessionGroup :: Maybe Group
   
• sessionTicketInfo :: Maybe TLS13TicketInfo
   
• sessionALPN :: Maybe ByteString
   
• sessionMaxEarlyDataSize :: Int
   
• sessionFlags :: [SessionFlag]
   

Fields

• cacheQuery :: ValidationCacheQueryCallback

  cache querying callback

• cacheAdd :: ValidationCacheAddCallback

  cache adding callback

Fields

• infoVersion :: Version
   
• infoCipher :: Cipher
   
• infoCompression :: Compression
   
• infoMasterSecret :: Maybe ByteString
   
• infoExtendedMasterSec :: Bool
   
• infoClientRandom :: Maybe ClientRandom
   
• infoServerRandom :: Maybe ServerRandom
   
• infoNegotiatedGroup :: Maybe Group
   
• infoTLS13HandshakeMode :: Maybe HandshakeMode13
   
• infoIsEarlyDataAccepted :: Bool
   

Fields

• hookRecvHandshake :: Handshake -> IO Handshake

  called at each handshake message received

• hookRecvHandshake13 :: Handshake13 -> IO Handshake13

  called at each handshake message received for TLS 1.3

• hookRecvCertificates :: CertificateChain -> IO ()

  called at each certificate chain message received

• hookLogging :: Logging

  hooks on IO and packets, receiving and sending.

Fields

• loggingPacketSent :: String -> IO ()
   
• loggingPacketRecv :: String -> IO ()
   
• loggingIOSent :: ByteString -> IO ()
   
• loggingIORecv :: Header -> ByteString -> IO ()
   

Fields

• bulkName :: String
   
• bulkKeySize :: Int
   
• bulkIVSize :: Int
   
• bulkExplicitIV :: Int
   
• bulkAuthTagLen :: Int
   
• bulkBlockSize :: Int
   
• bulkF :: BulkFunctions